PAP2T WEIRDNESS, dialing delay
Submitted by toolsource on Tue, 08/05/2008 - 1:25pm.
I have two linksys pap2t's working with trixbox, everything "works" however when I try and dial out there is a 5 second delay before the call goes through, this is an annoyance I was wondering if anyone is aware of a proper config that I can use with these devices to get around this issue, I found a post here that someone else was pressing the # button to dial, this allows the calls to go through but I again hoping someone knows the magic to get around this before I put this system in production.
Any Help would be greatly appreciated
Kevin Whited
System Administrator
Toolsource
Re: Dial Plans
Sun, 09/07/2008 - 7:49am
Hi Kevin
In order for your PAP2T to connect the call immediately after you dial you need to set up a dial plan. On the web configuration page under the "Line x" tab at the bottom there is field for a dial plan. The dial plan tells the PAP2T which numbers to match, for example:
(*xx|8xxxxxxx|0[2-9][2-9]xxxxxxx)
matches feature codes, 8 digit number beginning with 8 and 10 digit numbers beginning with 0 and 2-9.
More info on the Linksys dial plan format can be found in the IP Phone Admin Guide: http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobhead... under 'dial plan examples'
Member Since:
2008-07-30