Need help to config my TDM400P
Submitted by malbep on Fri, 08/15/2008 - 5:59am.
Hey every one,
I need help with my TDM400P, it were working fine with trixbox 2.4 and when I ugrade to 2.6.1, it not working anymore. I have the green led in the card but when you type on CLI: ztcfg -vv: you have the output saying
channel 01: FXO Kewlstart (Default) (Slaves: 01)
channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels to configure
Any help on our to configure this channels pls, I don't have enough experience on linux command if you can be more detail or specific, I will appreciate that.
Again thank in advance for your help
Oh my sorry for posting I
Fri, 08/15/2008 - 6:21am
Oh my sorry for posting I was wondering if people just read the specific topic of the forum. And to reply or comment on your answer I try to do setup-pstn and I still having the same problem. And from my FOP I can see on the trunks Zap 2 in green. When I try to setup from an extension I able also to make a phone call but when I try to call in (receive) it say this number doesn't exist.
Any help please
I don't understand:
Quote:
I
Fri, 08/15/2008 - 12:49pm
Yes, I try to plug the phone
Tue, 08/19/2008 - 12:10pm
Yes, I try to plug the phone on TDM400P but there is not dail tone. But when I try to config this as simply ZAP trunk, I'm able to dial from any other extensions but I can't receive incoming call. I match any DID to any number, etc. it not working. But before with the same PC, and Card I was able to config Zap ext. and had dial tone. Help please.
I am having a similar problem with TDM400P / trixbox 2.6.1.1
Thu, 08/28/2008 - 3:57pm
My TDM400P is has 4 FXO modules. I have a similar setup working on an older system.
When I call the phone number attached to a plain telephone, it works fine. The moment I plug it into any one of the 4 FXO ports, I get a recorded message from the phone company "number not in service".
Anyone have any ideas on what may be going on?
Here are my zapat*.conf files
zapata-auto.conf
; Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
; Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" (MASTER)
;;; line="1 WCTDM/0/0"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 1
context=default
;;; line="2 WCTDM/0/1"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 2
context=default
;;; line="3 WCTDM/0/2"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 3
context=default
;;; line="4 WCTDM/0/3"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-zaptel
channel => 4
context=default
zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
;echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs
#include zapata_additional.conf
zapata_additional.conf
; do not edit this file, this is an auto-generated file by freepbx
; all modifications must be done from the web gui
Member Since:
2008-03-15