TRIXBOX PRO SE configuring phones
Submitted by fabiomicro on Mon, 06/02/2008 - 1:20pm.
I have received our TRIXBOX PRO SE about 10 days ago and have not been able to register our phones LINKSYS 942, 962 and POLYCOM IP650(supposedly it would auto-register with trixbox without any additional configuration). The LINKSYS phones require a username(EXT#) and a password which i am not sure if it is the webpassword(which didnt work). I have been able to register the VOIP accts in trixbox. I have created extensions with each phones MAC addresses...so I think all i need is to register the phones to trixbox. Please let me know regarding what is the PASSWORD for the LINKSYS phones which will be entered in their GUI configuration under EXTs.
Also would appreciate any light in how to get the POLYCOM IP650 registered.
Thanks,
FABIO LISBOA
Fabio,
Depending on the
Mon, 06/02/2008 - 11:35pm
Fabio,
Depending on the version of the Polycom IP 650 they may or may not register properly. It should be noted that some Polycom versions require manual configuration on the phones of the TFTP / FTP server of the trixbox Pro for the phone to pull down its configuration files. You can also set Option 66 on your DHCP server to solve this problem.
The SIP Usernames and SIP Passwords for each phone will be listed in the Extensions -> Devices page of the Admin Panel once each device is assigned to an extension.
Hope that helps.
Thanks,
Mike
Member Since:
2008-06-02