Home » Forums » trixbox forums » trixbox endpoints

Nortel 1100 Series with SIP Software

barracuda
Posts: 25
 Member Since:
2008-03-09
Submitted by barracuda on Sun, 05/17/2009 - 4:11am.

Hi all,

Just wanted to share with the forum that I've recently installed an Nortel 1140e with SIP software.
The tricky part was the password (which wasn't that tricky) but after getting over that hurdle everything was straight forward.
The software needs a little more development in my opinion but overall, not too bad. It has all the features you need. Onboard phone directory, toggle through viocemail, etc.
I'm using version 2 SIP software and have been testing it for about 2 weeks now.

Cheers

‹ Registered SIP '702' at xx.xxx.xx.xx port 33124 expires 120 Did i brick it? ›


beunique
Posts: 6
 Member Since:
2008-09-26
1140e
Tue, 05/19/2009 - 10:38am

I have just converted a few 1140e Unistim sets to SIP. How did you figure out the password and configure the phone?



beunique
Posts: 6
 Member Since:
2008-09-26
nevermind
Tue, 05/19/2009 - 1:08pm

I figured this one out. I just had to set the right domain and choose an existing extension.



cheese
Posts: 1
 Member Since:
2009-08-11
how to convert 1140e unistim phones to SIP
Tue, 08/11/2009 - 8:19pm

I'm a n00b to tribox and bought an 1140e to convert from unistim to SIP, but have been unable to upload the firmware via tftp so far. I originally tried flashing the firmware using tftp32 on a windows box without success then found some posts for trixbox but having other issues with the version mentioned in the post running on my laptop. It referred to Trixbox 1.1, which doesn't support my laptop's NIC. Can someone please document the flashing procedure (verbose) for flashing the Nortel 1140e from Unistim to SIP?

Thanks



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.