Home » Forums » trixbox forums » SIP and IAX trunks and providers
ftocc

SIP Trunk for Sapo/Telepac or Netcabo (Portugal)

overlink
Posts: 3
 Member Since:
2007-10-07
Submitted by overlink on Tue, 01/08/2008 - 10:23pm.

Can anybody assist in setup a trunk whit this configuration ?
Proxy: proxy.voip.sapo.pt
Port proxy: 5070
Registar: voip.sapo.pt
Port registar: 5060
SIP URL: +351302019999
Username: +351302019999
Password: ******

I can connect whit a softphone, but in trixbox only get failures to register...

‹ Trixbox Unable to receive incomming calls on DID Speakeasy DID Compatibility ›


stickypt
Posts: 78
 Member Since:
2007-01-05
hi overlink
Wed, 01/09/2008 - 2:38am

Try these configurations. Wipe out all information not needed or specific to these instructions like those in USER DETAILS. Do not use your + (plus) as login user in front of the number. You can skip the proxy parameter :

1. Add SIP Trunk. And add the following configurations:

* Outbound Caller ID: <your phone number like this 351302019999)
* Never Override CallerID: Yes

* Trunk Name: Netcabo

PEER Details: 

canreinvite=yes
context=from-trunk
fromuser=<your phone number like this 351302019999)
host=voip.sapo.pt
insecure=very
nat=yes
qualify=yes
secret=<password>
type=friend
username=<your phone number like this 351302019999>

and

* USER Context: <your phone number like this 351302019999>
* Register String: <your phone number like this 351302019999>:<password>@voip.sapo.pt

After, setup and inbound route so your incoming call's can be properly routed to a extension or whatever you'd like. You just have to put at DID number <your phone number like this 351302019999>.



pjeronimo
Posts: 16
 Member Since:
2006-11-08
I have the same problem. I
Mon, 01/14/2008 - 3:18am

I have the same problem. I have it working on x-lite and it needs the + sign and the proxy parameter to work, so probably that's what is needed to get it working in trixbox



pjeronimo
Posts: 16
 Member Since:
2006-11-08
Is the problem solved ??
Tue, 01/22/2008 - 2:50am

Is the problem solved ??



overlink
Posts: 3
 Member Since:
2007-10-07
Not yet, I am waiting for a
Tue, 01/22/2008 - 4:36am

Not yet, I am waiting for a reply from the support of the Service provider, but still no reply...



pjeronimo
Posts: 16
 Member Since:
2006-11-08
With that service provider I
Tue, 01/22/2008 - 7:32am

With that service provider I think you can sit and wait.
I managed to register with the provider with this string:
+35130200xxxx@voip.telepac.pt:password:+35130200xxxx@proxy.voip.telepac.pt:5070
but I still can't make any calls, I get a "call failed: 603 declined". I think the provider is rejecting the call.



charles05663
Posts: 72
 Member Since:
2007-07-31
I had an issue in completing
Tue, 01/22/2008 - 8:15am

I had an issue in completing calls to. I had mistakenly deleted an Outbound Dialing Prefix under the trunk settings. I need a "+" (plus) sign prefixed to my outgoing numbers.



pjeronimo
Posts: 16
 Member Since:
2006-11-08
This is strange. I have 2
Tue, 01/22/2008 - 12:04pm

This is strange. I have 2 test machines, 1 with Trixbox 2.4 and 1 with elastix.
On Trixbox I get a "call failed: 404 not found" and on elastix I get a "call failed: 603 declined".



bblf
Posts: 2
 Member Since:
2006-12-12
Finaly its working !!
Mon, 01/28/2008 - 5:06am

I'm using these defenitions and its working !!

Trunk Name: Telepac

PEER Details:

canreinvite=yes
context=from-pstn
fromdomain=voip.telepac.pt
outboundproxy=proxy.voip.telepac.pt
port=5070
fromuser=<your phone number like this +351302019999>
host=voip.telepac.pt
nat=yes
secret=<password>
type=peer
username=<your phone number like this +351302019999>
qualify=yes

Register String:

<your phone number with +>@voip.telepac.pt:<password>:<your phone numberwith +>@proxy.voip.telepac.pt:5070

NOTE: secure that you have open the SIP and RTP Ports in you router.



overlink
Posts: 3
 Member Since:
2007-10-07
Signaling is Working, but no
Sun, 01/27/2008 - 10:32am

Signaling is Working, but no audio on Outgoing, incoming no audio.
also i had to allow anon. connections...



bblf
Posts: 2
 Member Since:
2006-12-12
Probably is a router config...
Sun, 01/27/2008 - 6:53pm

Just open your router ports to trixbox:
8000 to 20000 TCP/UDP
5004 to 5082 TCP/UDP
2727 TCP/UDP



nbviegas
Posts: 6
 Member Since:
2006-07-01
Incoming Routes
Mon, 06/16/2008 - 7:21am

Hi All,

Were you able to setup the incoming Route? I have tried with + or just and it simply does not dial-in.

Debugging the SIP trunk I am able to see the call coming in

Could you please advise?

Cheers,
nbviegas



nbviegas
Posts: 6
 Member Since:
2006-07-01
Incoming Routes - Figured that out...
Mon, 06/16/2008 - 12:59pm

Hi,

Just as for helping, if anybody faces similar problem:

The problem was I should have uynder trunk configuration "type = peer". By mistake I had "type = friend" and there were authentication problems.

Thanks



nbviegas
Posts: 6
 Member Since:
2006-07-01
Inbound Routes - Figured that out .... incomplete
Mon, 06/23/2008 - 3:01pm

Dear All,

I am still fighting agains the configuration. The outbound works fine but the inbound I can only get incoming calls if I configure a catch all inbound rule. If I have two voip tp direct to 2 diferent extensions it does not work:

-- Executing [s@from-pstn:1] NoOp("SIP/+351302007xxx-08c38408", "No DID or CID Match") in new stack
-- Executing [s@from-pstn:2] Answer("SIP/+351302007xxx-08c38408", "") in new stack
-- Executing [s@from-pstn:3] Wait("SIP/+351302007xxx-08c38408", "2") in new stack
-- Executing [s@from-pstn:4] Playback("SIP/+351302007xxx-08c38408", "ss-noservice") in new stack
-- Playing 'ss-noservice' (language 'en')

I have tried to use :

+351302007xxx@voip.telepac.pt:password:+351302007xxx@proxy.voip.telepac.pt:5070/+351302007xxx

but with no luck.
Can you please help?

Regards



raphaelpt
Posts: 1
 Member Since:
2008-08-12
Inbound calls
Tue, 08/12/2008 - 6:03am

Hi!

I'm using Sapo voip. Outbound calls are wornking but i don't have any inbound calls. I've tried the asterisk debug mode and i didn't saw any inbound call notification.
I've used the configuration provided by @bblf at a post above.

Can anyone help? wich configuration should i use for Incoming Settings:user details?

thanks,
raphaelpt



trigueiro
Posts: 2
 Member Since:
2008-09-26
Hi everybody, Im having the
Fri, 09/26/2008 - 10:34am

Hi everybody,

Im having the same problem, i can register and dial out, but i cannot receive any calls with telepac, this is my Trunk configuration:

Never Override Caller ID (Checked)

Trunk name: TELEPAC

PEER Details:

auth=+35130NUMBER:secret@voip.telepac.pt
authname=+35130NUMBER
call-limit=50
canreinvite=no
disallow=all
dtmfmode=rfc2833
fromdomain=voip.telepac.pt
fromuser=+35130NUMBER
host=proxy.voip.telepac.pt
insecure=very
nat=never
outboundproxy=proxy.voip.telepac.pt
port=5070
qualify=yes
registername=+35130NUMBER
secret=*******
type=friend
username=+35130NUMBER

USER Context: +35130NUMBER

USER Details:

fromuser=+35130NUMBER
insecure=very
secret=*******
type=peer
username=+35130NUMBER

Can anyone help me?

Thanks, Ricardo



SkykingOH
Posts: 3534
 Member Since:
2007-12-17
Look at the log and see
Fri, 09/26/2008 - 9:11pm

Look at the log and see where the calls are coming from.

You have to match the details in the inbound call settings. Host name or fromuser are sufficient for a match.

What do you get when you dial one of your DID's?

--

Scott

aka "Skyking"



Medalha
Posts: 2
 Member Since:
2008-10-10
Sapo/Telepac VoIP working now!
Fri, 10/10/2008 - 3:50am

After several days of hardship, trial and head scratching, I finally came to a working configuration.

My configuration is as follows (for Sapo VoIP just replace all instances of "Telepac" with "Sapo"):

Trunk outbound
------------------
username=+351302xxxxxx
secret=PASSWORD
canreinvite=yes
context=from-trunk
fromdomain=voip.telepac.pt
outboundproxy=proxy.voip.telepac.pt
port=5070
host=voip.telepac.pt
nat=yes
type=friend
qualify=yes
insecure=very

Trunk inbound
----------------
Context: +3513xxxxxx

context=from-internal
username=+351xxxxxx
secret=PASSWORD
type=friend

Register string
----------------
+351302xxxxxx@voip.telepac.pt:PASSWORD:+351302xxxxxx@proxy.voip.telepac.pt:5070/+351302xxxxxx

Extension
-----------
secret PASSWORD (extension password)
dtmfmode rfc2833
canreinvite no
context from-internal
host dynamic
type friend
nat yes
port 5060
qualify yes
etc. etc. etc.

Enjoy and give feedback, please!



Medalha
Posts: 2
 Member Since:
2008-10-10
Sapo/Telepac VoIP working now - UPDATE
Sat, 10/11/2008 - 4:46pm

I made some tuning here. In fact trixbox will still work with this provider if you keep ONLY the following under "Trunk > Incoming Settings":

USER Context: +351302xxxxxx
-----------------

For the sake of a more informative status report under PBX > PBX status, you can leave the following lines under "Trunk > Incoming Settings":

USER Details:
----------------
host=voip.telepac.pt
type=friend
nat=yes



trigueiro
Posts: 2
 Member Since:
2008-09-26
SkykingOH: im looking at the
Thu, 11/13/2008 - 11:39am

SkykingOH: im looking at the logs (tail -f /var/log/asterisk/full or asterisk -rvvvvvvvvv) and unfortunelly i cant get anything!!! i've also a netcall sip account configured in this server and i can go out and receive incomming calls with the netcall account. I've also called several times to telepac but because this isnt a router our a voip product known to their company, they cant help me :(



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.