2.6.2 op_server.pl: no process killed ?
Submitted by eperez83 on Tue, 03/04/2008 - 9:05am.
Has anyone encountered this error on first boot on a fresh install of 2.6.2? I have gotten this same exact error since the release of trixbox 2.4 but didn't pay much attention to it. After first boot it doesn't happen again but it takes 10 to 15 minutes just to get by that step. I would like to know what causes this problem and why it never happened before version 2.4.
This is the Error:
Running /var/trixbox_load/firstboot/90_freepbx_configure.sh...
Use of uninitialized value in string eq at /var/lib/asterisk/bin/retrieve_op_conf_from_mysql.pl line 415
op_server.pl: no process killed
*** HANGS FOR 10 to 15 MINUTES ***
Disconnected from asterisk server
*** Continues with boot then displays login ***
I'm running trixbox on:
AMD X2 3800+ 2.0Ghz
2 GB RAM
Asus A8N32-SLI motherboard
I also am getting this. I
Fri, 03/28/2008 - 6:12am
I also am getting this. I had a dificult freepbx install and uprgade and I am trying to fix the last few errors; when I run retrieve_conf directly I get this:
Checking for PEAR DB..OK
Checking for PEAR Console::Getopt..OK
Checking for /etc/amportal.conf ..OK
Bootstrapping /etc/amportal.conf ..OK
Parsing /etc/amportal.conf ..OK
Parsing /etc/asterisk/asterisk.conf ..OK
Connecting to database..OK
Connecting to Asterisk manager interface..OK
Added to globals: ASTETCDIR = /etc/asterisk
Added to globals: ASTMODDIR = /usr/lib/asterisk/modules
Added to globals: ASTVARLIBDIR = /var/lib/asterisk
Added to globals: ASTAGIDIR = /var/lib/asterisk/agi-bin
Added to globals: ASTSPOOLDIR = /var/spool/asterisk
Added to globals: ASTRUNDIR = /var/run/asterisk
Added to globals: ASTLOGDIR = /var/log/asterisk
Added to globals: CWINUSEBUSY = true
Added to globals: AMPMGRUSER = admin
Added to globals: AMPMGRPASS = amp111
Use of uninitialized value in string eq at /var/lib/asterisk/bin/retrieve_op_conf_from_mysql.pl line 415.
DB Error: no such table
Thanks
Well the workaround as i can
Fri, 03/28/2008 - 11:58am
Well the workaround as i can see in your posts, and tryied on my own is after the installation to disable the network interfaces on the TrixBox machine, start TrixBox, shut it down, start it again with the network interfaces enabled - then it will go normal startup .
I can also verify this error on a fresh install
Mon, 03/31/2008 - 6:42am
Will attempt workaround and reply
I can confirm the workaround went off without a hitch ...although the first reboot after pulling the eth cable produced a repeatitive:
mpg123:no process killed error
which kept repeating right over the top of my root login etc.....
fixed it with another reboot
all is good now...
I have the same error.
I
Wed, 07/30/2008 - 3:15am
I have the same error.
I just installed 2.6.1 with no network cables plugged in. All went fine until now.
I got the message
rm: cannot remove `/etc/asterisk/sip.conf' : No such file or directory rm: cannot remove `/etc/asterisk/iax.conf' : No such file or directory rm: cannot remove `/etc/asterisk/extensions.conf' : No such file or directory Use of uninitialized value in string eq at /var/lib/asterisk/bin/retrieve_op_conf_from_mysql.pl line 415. op_server.pl: no process killed
It did this to me when I tried to install it last week too, I left it while I went on dinner and when I came back it was at the logon screen. Seemed okay after that [but I couldn't get anything to work so I just reinstalled a previous version to test the card.]
It's no major problem as far as I can tell, just irritating that I have to wait an hour or so for it to load the first time.
Does anyone have any ideas what causes it?
Error in Fresh Install trixbox ce..
Sat, 12/20/2008 - 7:42pm
rm: cannot remove `/etc/asterisk/sip.conf' : No such file or directory
rm: cannot remove `/etc/asterisk/iax.conf' : No such file or directory
rm: cannot remove `/etc/asterisk/extensions.conf' : No such file or directory
Use of uninitialized value in string eq at /var/lib/asterisk/bin/retrieve_op_conf_from_mysql.pl line 415.
op_server.pl: no process killed
Also
/var/www/html/panel/safe_opserver: line 7: 2560 Terminated $FOPWEBROOT/op_server.pl
Is there any work around for this
Thanks
Hariram
Has to be something with the Firewall
Sun, 03/08/2009 - 11:52am
Member Since:
2007-08-25