Home » Forums » trixbox forums » Help

Sending DTMF inband for voicemail

JdNow
Posts: 4
 Member Since:
2009-11-03
Submitted by JdNow on Tue, 11/03/2009 - 11:16am.

I posted over in the h.323 forum, but figured I would post here as well. I'm connecting a Panasonic KX-TDA 200 with a h.323 gateway card with a trixbox installation. The ultimate goal is to have the trixbox handle voicemail for the panasonic pbx. The gateway card in the TDA appears to only send DTMF signals inband. Is there a way to configure voicemail to handle the dtmf codes inband?

‹ Trixbox on VPS Packet8 - BPS430 ATA - How to crack it... :) ›


vccs
Posts: 16
 Member Since:
2008-09-04
I am not familiar with
Tue, 11/03/2009 - 11:19am

I am not familiar with Panasonic but you can set up a trunk for the connection between the 2 systems and specify dtmfmode=inband on the trixbox side.

--

Matthew Martin
Chief Consultant
www.VCCS.ca



JdNow
Posts: 4
 Member Since:
2009-11-03
Sorry
Tue, 11/03/2009 - 11:50am

Still learning Trixbox and Asterisk so sorry if this is a newbie question, where do I set dtmfmode=inband ? I have a custom trunk for connecting to the panasonic. I don't see where that gets set.



antidelldude
Posts: 214
 Member Since:
2009-05-18
You put it in with your
Tue, 11/03/2009 - 12:16pm

You put it in with your trunk settings.

--

Regards,
Jon
Please respond if your problem was ever solved, and how you solved it. It'll help the next guy.



JdNow
Posts: 4
 Member Since:
2009-11-03
In the custom dial string?
Tue, 11/03/2009 - 2:08pm

In the custom dial string?



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.