NO RTP traffic from originating client
Submitted by saicjoe on Wed, 08/27/2008 - 10:43am.
Hi all,
I currently am attempting to set up trixbox CE. I have a server, a bridge, and two laptops, each running an xlite client and wireshark. When I place a call, the called client transmits a stream of rtp packets back to the server, however the calling client neither sends or receives rtp packets, resulting in no voice traffic. When I set up a conference bridge, both clients can call in and communicate without any problems. I've already disabled nat and opened ports 10000-20000, any clues as to what else might be wrong?
Thanks,
Joe
Maybe try making sure STUN is turned off
Wed, 08/27/2008 - 3:13pm
With the health warning that I'm a newbie here ...
But I found that having STUN enabled on clients on the same LAN can cause one-way audio.
I use Counterpath Eyebeam - and it seems to have STUN on by default (under the Topology tab of the SIP account properties). I don't know the interface for xlite, but for Eyebeam I turn STUN off by making sure I have "Use local IP address" and for STUN "Use specified server" with the address box blank.
I've got wireshark running
Fri, 09/05/2008 - 12:46pm
Member Since:
2008-08-27