2.6.1 RC3
Submitted by kerryg on Fri, 05/16/2008 - 7:44pm.
It's taken a little longer than expected to roll up a bunch of changes that are in this build. Hopefully there won't be much else. Other than one trivial issue with the bulk importer we are on a code freeze and are only fixing bugs prior to rolling this out as final.
http://internap.dl.sourceforge.net/sourceforge/asteriskathome/tri...
I cant download this
I get
Fri, 05/16/2008 - 8:35pm
I cant download this
I get this message
The requested URL /sourceforge/asteriskathome/trixbox-2.6.0.18-i386.iso was not found on this server.
--
New & Improved Site: trixbox Maintenance Guides
There is no upgrade from
Fri, 05/16/2008 - 9:53pm
There is no upgrade from stable to beta versions and vice versa
--
New & Improved Site: trixbox Maintenance Guides
So I wont be able to go from
Fri, 05/16/2008 - 10:04pm
So I wont be able to go from Beta to Stable, once it's released?
How hard is it to do a backup (I've already done) and restore it into this new version? Also will there be a upgrade path from current stable to this new one once it's released? I figure I might as well do a re install as call parking keeps crashing my box and I think I made a mess installing the sccp in the first place.
You can use the Backup &
Fri, 05/16/2008 - 10:19pm
You can use the Backup & Restore module in freepbx
--
New & Improved Site: trixbox Maintenance Guides
(No subject)
Fri, 05/16/2008 - 11:20pm
Thanks for getting the Hostname in.
Fri, 05/16/2008 - 11:45pm
Looks well integrated with the new status.
From viewing the screenshots however it appears to be displayng the IP address.
James, did you set localhost to your IP address? If not this is not working as expected.
I will of course load and try myself.
Scott
--
Scott
aka "Skyking"
the screenshots above are a
Sat, 05/17/2008 - 12:28am
the screenshots above are a clean vmware install.. I didn't do anything but log in....
I've seen a few, I my self
Sat, 05/17/2008 - 1:01am
I've seen a few, I my self have been working to get it going for the past few weeks. There's far more features in the SCCP Firmware than there are in the SIP. Looking at the search although a lot of the recent ones are mine there's a good amount of people asking where SCCP support went and if there's going to be any. The SIP Firmware just doesnt do the Cisco Phones justice such as soft feature buttons like call parking and DND, ect.. Also I'm not sure but I thought some of the Cisco Phones only ran on SCCP?
In any event i've seen a decent amount of people who would want to use SCCP over SIP if it was available if you'd like I can find the topics.
Here's a few:
http://trixbox.org/forums/vendor-specific-unmoderated/linksys-cis...
http://trixbox.org/devblog/share-your-ideas-trixbox-ce-3-0
There's a request for out of box support for SCCP with Trixbox CE 3
http://trixbox.org/forums/trixbox-forums/open-discussion/sccp-mis...
SCCP Missing as of November last post in April Looking for it.
http://trixbox.org/forums/vendor-specific-unmoderated/linksys-cis...
This persons running it trying to get it to work
ect... there's far more topics on it too. It seems like its something people want although it may be "low" compared to other features I'm sure if it was implemented far more people would want to use it over having to be pestered with flashing the SIP Firmware to their cisco phones. There's no reason for sccp-b not to be supported atleast in the package manager is there? It seems "easy" enough to setup once you get the hang of it but it'd be nice to not have to manually configure and compile and all that.
wow dev - thats a lot of
Sat, 05/17/2008 - 1:00am
wow dev - thats a lot of progress.
havent loaded it yet, but just wondering if anything was addressed for the smtp relay page - it doesnt allow relay without authentication. not a big deal, but as long as you are making the field, it may as well relay mail with/without auth - some of my ISPs still dont require auth.
james@james-laptop:~$ md5sum
Sat, 05/17/2008 - 9:55am
james@james-laptop:~$ md5sum Desktop/trixbox-2.6.0.18-i386.iso
ea44f35121976f5cbe93ea6462d11273 Desktop/trixbox-2.6.0.18-i386.iso
timelines are subjective and
Sat, 05/17/2008 - 5:11pm
timelines are subjective and often suicide...
Release is based on a formula of Downloads devided by bugs multiplied by the distance from the sun to the third moon of Venis assuming the moons are aligned in a 45 degree angle during the 15th anniversary of the last rain of the second Wednesday where the temperature was over 100 degrees in July 1993.
There is software that figures this out but you have to google...
Upgrade fro RC1 to RC3
Tue, 05/20/2008 - 6:09am
Is there no simple upgrade path without an install from RC1 to RC3 without a fresh install?
If a fresh install is necessary, to help out those that are not fully up-to-speed on trixbox, could someone please post which boxes should be checked on the System/Backup setup to create exactly the right backup set so a restore can easily be done in the new release?
Quote:
Is there no simple
Tue, 05/20/2008 - 6:57am
Quote:
Is there no simple upgrade path without an install from RC1 to RC3 without a fresh install?
I am not sure why you would want to do this? It would seem reasonable to load the a stable version and then attempt an upgrade to the beta and post any bugs found. Why would you upgrade beta's?
Maybe I am missing something, it could introduce issues that not not actually bugs.
Scott
--
Scott
aka "Skyking"
Phrased Wrong
Tue, 05/20/2008 - 8:03am
Here's a rephrase and additional details of the question:
I had a copy of 2.6.0.7 installed on a very old server just to see what trixbox was like. We decided to go with trixbox CE and ordered a new server for the permanent production machine. I decided to install 2.6.0.13 on it as this was not a live production server and full deployment was not planned until late July to give us time to learn and run trixbox in a simulated parallel mode with our current phone system.
My question was if 2.6.1.13 cannot be upgraded to 2.6.1.18 or the 2.6.1.x stable copy when it is released without doing a fresh install, what boxes in the backup utility need to be checked to ensure a proper backup that can be restored with a minimum of additional configuration on the new install?
Do you have a working config
Tue, 05/20/2008 - 8:17am
Do you have a working config on the 2.6.1.13 machine?
You should be able to just upgrade it. My only concern was if it does not work to separate the upgrade issues from base bugs.
Since it is not a production system, and this is just my opinion, I would give it a try. Especially if you have extensions programmed, IVR's or complex dial plans you can test.
I am sure the trix folks will publish and upgrade guide, I would hope you could go all the way from any 2.6 to the the final 2.6.1.x release.
Scott
--
Scott
aka "Skyking"
Colors Washed Out
Thu, 05/22/2008 - 6:07am
I just did a VMServer install of 2.6.0.18 and everything is working fine.
I am testing using Firefox's newest RC of 3 and the colors all seem washed out, On the server status window the text is in white and very hard to see, with IE they are in black.
Is this FF3?
I have also noticed this with my production system.
callback module
Thu, 05/22/2008 - 6:31am
Missing modules!
Thu, 05/22/2008 - 9:40am
Hello Kerry,
I've compared the fresh installed RC3 and a running 2.4.x and there are a lot of modules not available.
Internal Options & Configuration:
Callback
Misc Applications
Misc Destinations
PIN Sets
VoiceMail Blasting
Support:
Asterisk Logfiles
Online Support
System Administration:
Asterisk CLI
Asterisk Info
Backup & Restore
Phonebook
Third Party Addon:
Customer DB
Gabcast
Inventory
In RC3 the module Time Conditions version is 2.4.4.1
In 2.4 the module Time Conditions version is 2.4.4.2
An online update is not available.
Trude
The following are missing
Mon, 06/16/2008 - 4:10am
The following are missing for me to on the new 2.6 version :(
Internal Options & Configuration:
Callback
Misc Applications
Misc Destinations
PIN Sets
VoiceMail Blasting
Support:
Asterisk Logfiles
Online Support
System Administration:
Asterisk CLI
Asterisk Info
Backup & Restore
Phonebook
Third Party Addon:
Customer DB
Gabcast
Inventory
What's the deal?
Mon, 06/16/2008 - 2:50pm
Member Since:
2006-05-31